Télécharger Vibration analysis sur PC

1. This allows the evaluation of not only the strength and frequency of the vibration, but also the speed of rotation of various mechanisms: fans, motors, various rotating components; since the vibration frequency often (but not always) coincides with the frequency of rotation.

2. • Values of any point (for linear frequency scale, octave bands and vibration wave (at maximum detail)).

3. Should vibration frequency exceed 50 Hz, the peak will be recorded at an incorrect frequency, and hence speed or displacement will not be calculated correctly.

4. The application analyzes the data from the phone's accelerometer and builds a vibration spectrum.

5. When converting acceleration into speed or displacement, at 0-5 Hz frequencies noise starts prevailing over vibration peaks, which is why such frequencies are disregarded when doing the conversion.

6. In addition to decreasing vibration for the iPhone, a foam pad improves contact between the iPhone and the vibrating part, which makes the transmission of vibration more accurate and produces better results.

7. The application will be useful in determining the quality of fans and motors, in determining whether their actual parameters coincide with the ones declared by the manufacturer, it will find its uses in monitoring of malfunctions (e.g. in bearings) or while testing the quality of assembly and balancing of the homemade mechanisms with rotating parts.

8. • Root mean square (RMS, for vibration) or average value (AVG, for absolute values) for vibration wave.

9. If the analyzed vibration is too strong, use a foam material pad, or put your iPhone at a distance where the force of the vibration is not dangerous to your device.

10. For vibration measurement, the data obtained during calibration are NOT USED.

11. To activate the settings, turn on the "Vibration wave" mode and turn off the "Only fluctuations" mode.